Chapter 3 — About the Scanner
42 Dolphin CT50 Mobile Computer User Guide
Scan a Bar Code
The scanner has an aiming beam to help you correctly frame bar codes.
It also supports omni-directional (360°) scanning to make it easier for
you to scan bar codes.
1 Tap All Apps > Demos > ScanDemo.
2 Point the scanner window at the bar code and hold the computer
steady a few inches from the label.
Notification Settings
Setting Description Default
Good Read Notification Enables or disables a good read notification.
The notification consists of a green blink of the
Good Read LED, a short beep, and an optional
short vibration.
Enabled
Bad Read Notification Enables or disables notification of a failed scan.
The notification consists of a red blink of the
Good Read LED, an error beep, and an optional
short vibration.
Disabled
Vibrate Enabled Enables or disables whether the computer
vibrates when there is a good or bad read.
Disabled
Note: Before you start scanning bar codes, use the Settings app to
enable only the bar code symbologies that you need.
To Next Page
Loading...
