Chapter 3 — About the Scanner
38 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
WEDGE_POWER_TIMEOUT Use this command to optimize scan
performance or to save power.
The WEDGE_POWER_TIMEOUT defaults to
30 ms. After 30 seconds of inactivity, the
scan acquisition system enters a low power
state. Press the scan button to exit the low
power state and power up the scan
acquisition system.
The timeout value is set using the
WEDGE_POWER_TIMEOUT profile
command. The units are milliseconds.
30 ms
PREAMBLE Adds a prefix to the start of the bar code
data.
POSTAMBLE Adds a suffix at the end of the data to bar
code data.
ENTER_DELAY Inserts a delay between bar codes when
wedging the bar code data into the keyboard
buffer. A delay of ENTER_DELAY is inserted
whenever the Wedge encounters a carriage
return, line feed, or tab key. The units for
ENTER_DELAY are milliseconds.
Some applications, such as Excel, may
require additional processing time when
advancing to the next input field. Without a
delay, data may arrive faster than the
application can process the data. You can
use the POSTAMBLE command to add a line
feed at the end of each bar code.
200 ms
HONWedge Profile Commands (continued)
Profile Commands Description Default
To Next Page
Loading...
