Honeywell Domonial - System Lock and Reset; Operator Reset Procedure

SYSTEM LOCK

After a confirmed alarm, your system requires an operator reset.
 Call your alarm company. The operator will provide the remote reset code, based
on the code displayed on the keypad.
MEMO
-----------------------
INTRUDER
TOTAL SET
SYSTEM LOCKED
-----------------------
<=
OK
SYSTEM LOCKED
-----------------------
CALL OPERATOR
CODE:
XXXXXX
-----------------------
<=
OK
UNLOCK SYSTEM
-----------------------
PLEASE ENTER
RESET CODE
-----------------------
<=
OK
SYSTEM
RESTORED
14