16
ADDING, MODIFYING OR REMOVING TAGS
This function allows you to allocate TAGs to different users.
Select 2-TAGS and press
Enter the Master Code or present the Master TAG. The list of users is displayed.
To assign a TAG to an existing user:
Select a user from the list with and confirm your choice with
The following screens are displayed.
Press to validate each screen, or to cancel the operation.
Touch the Tag to the Tag Identification Area within 10 seconds.
A tone confirms that the tag has been recognised and added to your security
system.
► When a new TAG is assigned to a user, it overwrites the existing tag.
To disable a TAG:
Select a user with and confirm your choice with
Pressing will disable this user’s TAG.
► If you disable a TAG, the name of the owner is struck through.
TAGS
1- USER 1
2- CHRISTOPHER
3- VIRGINIA
4- WILLIAM
5- SOPHIE
6- ETC...
ATTRIBUTE TAG TO
VIRGINIA
SHOW YOUR TAG
CANCEL
ATTRIBUTE TAG TO
VIRGINIA
ACCEPT THE
NEW TAG?
NO YES
TAGS
VIRGINIA
TAG ALLOWED?
NO YES
Show the TAG Accept the TAG
Authorise the TAG
To Next Page
Loading...
