Honeywell Enhanced Xenon 1902H User Manual

Note: Refer to your User’s Guide for information about cleaning your
device.
For localized language versions of this document, go to
www.honeywellaidc.com.
Get Started
Turn off the computer’s power before connecting the base, then
power up the computer once the base is fully connected. Once the
base is connected and powered up, follow the Link the Scanner
instructions (below) to link the scanner to the base.
Power Supply Assembly (if included)
Note: The power supply must be ordered separately, if needed.

Honeywell Enhanced Xenon 1902H Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Read rate (max)	25 reads/s
Yaw reading angle	-65 - 65 °
Tilt reading angle	32.2 - 41.4 °
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	PDF417
2D (matrix & stacked) barcodes supported	-
Cable length	3 m
Wireless range	10 m
Bluetooth version	2.1+EDR
Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Certification	CE, UL
Product color	Grey, White
LED indicators	Yes
International Protection (IP) code	IP41
Sustainability certificates	RoHS
Battery life	14 h
Charging time	4.5 h
Battery capacity	1800 mAh
Power consumption	1000 mA
Power source type	Battery, USB
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Power consumption (typical)	5 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	USB

Weight and Dimensions

Depth	160 mm
Width	71 mm
Height	104 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm