Need help?Do you have a question about the Honeywell MetroSelect Eclipse MS 5145 and is the answer not in the manual?
Explains methods for configuring scanners via bar codes, including Single-Code and Multi-Code.
Describes the process for configuring scanners using individual bar codes for specific features.
Details the process for configuring scanners using multiple bar codes in sequence.
Explains how to reset scanner settings to factory defaults using a 'Recall Defaults' bar code.
Configuration options for UPC/EAN bar code symbologies, including enable/disable and check digit settings.
Configuration options for Code 128 bar code symbology, including formatting and character handling.
Configuration options for Code 39 bar code symbology, including check digits and framing.
Configuration options for various 2 of 5 Codes symbologies like Interleaved and Matrix.
Configuration options for Codabar bar code symbology, including start/stop characters and check digits.
Settings to configure specific lengths for decoded bar codes by assigning types to lock lengths.
Options for enabling/disabling 2-digit supplements for bar codes.
Configuration for Bookland (979) supplement requirements for bar codes.
Configuration for ISBN check digit transmission and Bookland to ISBN conversion.
Configuration options for GS1 DataBar 14 symbology, including check digit and application ID.
Configuration options for GS1 DataBar Limited symbology.
Configuration options for GS1 DataBar Expanded symbology.
General configuration settings for ISBT Code 128, including special transmit modes.
Configures time requirements for finding concatenated bar codes and pre-defined sequences.
Configures user-defined sequences for bar code concatenation using specific identifiers.
Configuration for RS232 serial communication, including parity, baud rate, and handshaking.
Enables keyboard emulation, wedge defaults, and stand-alone operation.
Enables USB interface and loads various USB emulation and default settings.
Controls when the scanner can enter configuration mode and accept bar codes.
Configures scan buffers and the number of redundant scans required for a good read.
Configures scanner beep tones, LED behavior, and sound feedback.
Sets delays between data characters and communication timeouts for reliable transmission.
Defines host commands and scanner test modes for diagnostics and control.
Allows adding custom prefixes and suffixes to transmitted data for formatting.
Configures standard prefix and suffix characters for data transmission.
Configures LRC and BCC for data integrity and error checking.
Allows character replacements and configuration of special formatting modes.
Configures formatting options for UPC/EAN bar codes, including check digits and expansions.
Configures formatting options for Codabar bar codes, including start/stop characters and check digits.
Configures formatting options for Code 39 bar codes, including check digits and prefixes.
Configures formatting options for Plessey and 2 of 5 Codes bar codes.
Configures parity features and baud rate for RS232 communication.
Configures data/stop bits and hardware/software handshaking for RS232.
Configures software handshaking protocols like ACK/NAK and XON/XOFF.
Enables keyboard emulation, wedge defaults, and stand-alone operation modes.
Selects country-specific keyboard layouts and scan code tables for compatibility.
Configures special keyboard functionalities like Alt-Mode and InterScan code delays.
Enables OCIA mode for Optically Coupled Interface Adapter communication.
Enables light pen emulation mode and configures bar/space high settings.
Configures data transmission format and light pen source polling.
Configuration options for IBM 46xx series ports, including RS485 communication.
Enables USB interface and loads various USB emulation and default settings.
Enables uni-directional and bi-directional USB serial emulation modes.
Details on code bytes 0-9 and their representation of ASCII characters.
Tables mapping code bytes to bar code types and ASCII values to characters.
Maps keyboard keys to scan codes and prefix/suffix values for custom input.
Covers activation range, scan modes, CodeGate status, laser modes, and time outs.
Features for PDF, MicroPDF, and composite code handling.
Bluetooth setup, including address, PIN, service mode, and sleep settings.
Inventory mode, data storage, transmission, and quantity field management.
Options for serial program, TTL UART, and detect/notify modes.
Configuration for activation modes, laser-on time outs, and sleep mode.
Options for loading custom defaults and resetting to Honeywell defaults.
Details on entering and using serial program mode for commands and settings.
Contact details for technical support offices worldwide.
Contact details for obtaining warranty or non-warranty service and repair.
To Next Page
General