Honeywell MetroSelect Eclipse MS 5145 - Standard Prefix and Suffix Characters

8–4
Standard Prefix Characters
³ 1 1 6 6 1 5
Enable STX Prefix – The scanner will transmit a
Start of TeXt (ASCII 02H) before each bar code.
³ 1 1 6 6 0 5
* Disable STX Prefix
³ 1 0 5 5 1 3
Enable Rochford-Thomson Mode
³ 1 0 5 5 0 3
* Disable Rochford-Thomson Mode
³ 1 0 7 9 1 5
Enable AIM ID Characters
³ 1 0 7 9 0 5
* Disable AIM ID Characters
³ 1 1 6 6 1 7
Enable UPC Prefix ID – A prefix will be
transmited before any UPC/EAN code. The
prefixes are A (UPC-A), E0 (UPC-E), F (EAN-13),
and FF (EAN-8).
³ 1 1 6 6 0 7
* Disable UPC Prefix ID.
³ 1 0 7 9 1 1
Enable NCR Prefix ID – A prefix will be
transmitted before the following code types. The
prefixes are as follows: A (UPC-A), E0 (UPC-E),
FF (EAN-8), F (EAN 13), B1 (Code 39) B2 (ITF),
B3 (Code 128 and other codes).
³ 1 0 7 9 0 1
* Disable NCR Prefix ID
³ 9 4 1 5 0 0
Enable NCR Prefix Character
³ 1 0 7 9 1 7
Enable Nixdorf ID Characters – This option
transmits code identities before each bar code
for many Siemen/Nixdorf registers.
³ 1 0 7 9 0 7
* Disable Nixdorf ID Characters