Honeywell MetroSelect Eclipse MS 5145 User Manual

8–2
User Configurable ID Characters, Code Specific
³ 1 0 5 5 0 7
* Use Configurable Code ID Bytes as Prefixes –
User configured, code specific ID bytes are
transmitted before the data. If using prefixes,
user configured suffixes cannot be used.
³ 1 0 5 5 1 7
Use Configurable Code ID Bytes as Suffixes –
User configured, code specific ID bytes are
transmitted after the data. If using suffixes, user
configured prefixes cannot be used.
‡ Enter configuration mode then scan this bar code followed by the three
code byte bar codes (on page 16–1) that represent a unique ID character to
be associated with this bar code type.
³ 9 0 5 6 0 0
~ Configurable UPC-A ID ‡
³ 9 0 5 7 0 0
~ Configurable UPC-E ID ‡
³ 9 0 5 8 0 0
~ Configurable EAN-8 ID ‡
³ 9 0 5 9 0 0
~ Configurable EAN-13 ID ‡
³ 9 0 6 0 0 0
~ Configurable Code 39 ID ‡
³ 9 0 6 1 0 0
~ Configurable Code 128 ID ‡
³ 9 0 6 3 0 0
~ Configurable Code 93 ID ‡
³ 9 0 6 4 0 0
~ Configurable Code 11 ID ‡
³ 9 0 6 2 0 0
~ Configurable Telepen ID ‡

Honeywell MetroSelect Eclipse MS 5145 Specifications

General

Brand	Honeywell
Model	MetroSelect Eclipse MS 5145
Category	Scanner
Language	English