8–1
Prefixes/Suffixes
Scan the Enter Configuration Mode bar code before trying to set these features
(see the Multi-Code Method on page 1–1).
User Configurable Prefixes, All Data
~ Configurable Prefix Character #1 – A prefix ID
can be added and assigned for data transmission.
Use this code with a code byte sequence, on
16–1, which represents the desired character.
~ Configurable Prefix Character #2 – Assigns a
second configurable prefix character.
~ Configurable Prefix Character #3
– Assigns a
third configurable prefix character.
~ Configurable Prefix Character #4 – Assigns a
fourth configurable prefix character.
~ Configurable Prefix Character #5 – Assigns a
fifth configurable prefix character.
~ Configurable Prefix Character #6 – Assigns a
sixth configurable prefix character.
~ Configurable Prefix Character #7 – Assigns a
seventh configurable prefix character.
~ Configurable Prefix #8 – Assigns an eighth
configurable prefix character.
~ Configurable Prefix Character #9 – Assigns a
ninth configurable prefix character.
~ Configurable Prefix Character #10 – Assigns a
tenth configurable prefix character.
* Clear All User Configurable Prefixes
To Next Page
Loading...
Need help?
General