Honeywell MetroSelect Eclipse MS 5145 - Keyboard Configuration and Features; Keyboard Emulation and Defaults; Country;Scan Code Table Selection

11–1
Keyboard
Enable Keyboard Emulation
³ 9 9 9 9 9 4
Load Keyboard Wedge Defaults – Loads the
default settings for keyboard wedge mode.
³ 5 1 5 5 1 5 3
Enable Stand-Alone Keyboard Emulation –
Use this with special stand-alone models that are
not cabled for an external keyboard. Scan this
bar code to enable the Stand-Alone Mode. The
scanner will send keyboard “power on”
information and configure hardware to simulate a
constant keyboard connection.
³ 5 1 5 5 1 4 3
* Enable Keyboard Wedge Emulation – Use this
with an external keyboard. Transmit in wedge
made to allow standard PC keyboards to
communicate when no bar code data is
available.
Country/Scan Code Table Selects
³ 4 1 6 2 6 0
* USA Keyboard
³ 4 1 6 2 8 0
Switzerland Keyboard
³ 4 1 6 2 5 0
Spain Keyboard
³ 4 1 6 2 4 0
Italy Keyboard
³ 4 1 6 2 3 0
Germany Keyboard
³ 4 1 6 2 2 0
France Keyboard
³ 4 1 6 2 1 0
UK Keyboard
11