Honeywell MetroSelect Eclipse MS 5145 - Interscan Code Delays

11–6
³ 1 1 6 3 0 2
Enable Right Alt Key Sequencing
³ 1 1 6 3 1 2
Disable Right Alt Key Sequencing
³ 1 1 6 4 1 3
Enable LaCaixa Special Keyboard Prefix &
Suffix Scan Codes
³ 1 1 6 4 0 3
* Disable LaCaixa Special Keyboard Prefix &
Suffix Scan Codes
InterScan Code Delays
³ 8 1 6 5 8 0
* InterScan Code Delay 800 msec – The time
specified represents the amount of time between
individual 11-bit scan codes. This parameter may
need to be adjusted for operation with certain PC
keyboard BIOS.
³ 8 1 6 5 7 5 0
InterScan Code Delay 7.5 msec – This time
specified represents the amount of time between
individual 9-bit scan codes. This parameter may
need to be adjusted for operation with certain PC
keyboard BIOS.
³ 8 1 6 5 1 5 0 0
InterScan Code Delay 15 msec – The time
specified represents the amount of time between
individual 11-bit scan codes. This parameter may
need to be adjusted for operation with certain PC
keyboard BIOS.
³ 9 1 6 5 0 0
~ Variable InterScan Code Delay msec – Refer
to Multi-Code Method on page 1–1. Sets value in
100 microsecond increments.