Honeywell MetroSelect Eclipse MS 5145 - GS1 DataBar Limited Options; GS1 DataBar Expanded Settings

4–2
GS1 DataBar Limited
³ 1 0 0 4 1 4
Enable GS1 DataBar Limited
³ 1 0 0 4 0 4
* Disable GS1 DataBar Limited
³ 1 1 4 9 0 3
* Transmit GS1 DataBar Limited CD
³ 1 1 4 9 1 3
Do Not Transmit GS1 DataBar Limited CD
³ 1 1 4 9 0 4
* Transmit GS1 DataBar Limited Application ID
–
Application identifier “01” is transmitted by default.
³ 1 1 4 9 1 4
Do Not Transmit GS1 DataBar Limited
Application ID
³ 1 1 4 9 0 5
* Transmit GS1 DataBar Limited Symbology ID –
Symbology identifier “]e0” is transmitted by default.
³ 1 1 4 9 1 5
Do Not Transmit GS1 DataBar Limited
Symbology ID
GS1 DataBar Expanded
³ 1 0 0 4 1 5
Enable GS1 DataBar Expanded
³ 1 0 0 4 0 5
* Disable GS1 DataBar Expanded
³ 1 1 4 9 0 6
* Transmit GS1 DataBar Expanded Symbol ID –
Symbology identifier “]e0” is transmitted by default.
³ 1 1 4 9 1 6
Do Not Transmit GS1 DataBar Expanded
Symbol ID