AlcoQuant 6020 plus
34 Doc no.: 059-07-1001779_A6020plus_GB-5.2.1 / 12.2021
Move AlcoQuant 6020 plus closer
to the printer.
Check, if the used printer has
wireless printing capability at all.
Set >Printer Setup< to >Cable<
and have a test printout, to check
if there is a general printing
No measurements are possible.
with
continuous
Charging adapter connected.
No measurements are possible.
switches off
automatically
after a certain
period of time
The device switches itself off
automatically after 2 minutes of
non-activity to save energy.
The auto-off function is
configurable in the Setting menu.
Operation Battery icon
blinks and
cyclical
warning tone
The battery voltage is very low.
The batteries/accumulator must
be replaced/recharged as soon as
possible.
Measurements are still possible.
Operation Battery empty
Device
beeps
and
switches
short
period of
time.
RED flashes The battery voltage is too low.
Device switches off.
Replace/charge the
batteries/accumulator.