Honeywell Farenhyt ECS Series - 5: Installing the Microphone

ECS Series Manual — P/N 151455:H 2/15/2022 17
Installing the ECS-VCM ECS Device Installation
4.2.5 Installing the Microphone
To install the microphone follow these steps:
1. Clip the microphone into the microphone clip.
2. Insert microphone cord through hole at the bottom of the dead front panel.
3. Attach strain relief clip to microphone cord. The strain relief clip should have about 2.75” of microphone cord through it.
Figure 4.7 Sliding Microphone into Microphone Clip
Figure 4.8 Microphone Cord Inserted Through Dead Front Panel Hole
1. 2.
2.75”
Figure 4.9 Installing Strain Relief Clip