Honeywell Farenhyt ECS Series - 3: Mounting the ECS-DUAL50 WBD Board Only

46 ECS Series Manual — P/N 151455:H 2/15/2022
ECS Device Installation Installing the ECS-DUAL50W
5. Install remaining fasteners and tighten.
4.7.3 Mounting the ECS-DUAL50WBD Board Only
1. Ensure AC and DC power have been removed from the panel.
2. If this module is a replacement for an existing ECS-DUAL50W, remove the screws which secure the board to the enclosure.
board mounting bracket
mounting key holes
bottom mounting holes
24.75”
14.5”
11”
Figure 4.51 Cabinet Flush-Mount Dimensions and Mounting Hole Locations
NOTE: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances.