Honeywell Field Device Access Point - Fdap2

FIELD EXPANDABLE WIRELESS IO
OWDOC-X256-en-323A
52
FDAP2
The FDAP2 router Ethernet cable should be connected to the Modbus Slave Ethernet port
as shown in the following figure.
Fig. 22. FDAP2 Connecting Modbus
The FDAP router Ethernet cable should be connected through a Cisco Switch, if you have
multiple TCP Modbus slaves as shown in the following figure.
Fig. 23. FDAP with Cisco Switch- Multiple Modbus
+
Modbus Slave
CAT5E feed
568B
+
Modbus Slave 2
Modbus Slave 1
Modbus Slave 0