About this guide
This guide describes the procedures to install, configure, and operate the Field Device
Access Point (FDAP2), Field Device Access Point Gen3 (FDAP Gen3), and Field Device
Access Point Gen3 Anchor (FDAP Gen3 Anchor). FDAP is one of the components in the
OneWireless Network solution for industrial control.
Revision history
Intended audience
This guide is intended for people who are responsible for planning, administering, and
operating the OneWireless network. These people include Plant Managers, Process
Engineers, and System Administrators.
Prerequisite skills
It is assumed that you are familiar with the operation of OneWireless network, Experion
system software and the plant processes which Experion controls, Microsoft Windows
operating systems and netwsork administration tasks.
How to use this guide
This guide provides guidance on:
• FDAP description
• FDAP installation
• FDAP configuration
• FDAP monitoring
• FDAP maintenance and troubleshooting
Related guides
The following guides and sources contain additional information required for deploying
OneWireless network. It is recommended to have these guides readily available for
reference.
To Next Page
Loading...
