For more information about setting up a monitoring area and for location-specific
monitoring, see the Wireless Device Manager User’s Guide (OWDOC-X254-en).
Monitor using Provisioning Handheld device
The FDAP is authenticated using a Provisioning Handheld device. Once the FDAP is
authenticated, it joins the network. A Provisioning Handheld device can be used to monitor
the status of the authenticated FDAP, and Provisioning Handheld device displays status
as Discover, Secure, Joined, or Not Joined. You can read and set various FDAP parameters
through the Provisioning Handheld device. If the FDAP is unable to join the network, you
can read the FDAP parameter data through the Provisioning Handheld device and
troubleshoot.
Monitor using events
You can monitor system events generated by the FDAP. Events are generated when the
FDAP joins the network, when the FDAP is Online, or when the FDAP is Offline or switched
off. You can also export the event log created for a period. For more information about
monitoring device using events, see the Wireless Device Manager User’s Guide (OWDOC-
X254-en).
Monitor using reports
You can generate and view various reports about connectivity, and device health of FDAPs
in a network. You can generate and view the following reports:
• Battery Life
• Device Health Overview
• Device Summary
• Device History
• Connection Summary
• Connection History
• Inventory Summary
You can print the report and save the report in .csv format. For more information about
reports, see the Wireless Device Manager User’s Guide (OWDOC-X254-en).
To Next Page
Loading...
