EasyManua.ls Logo

Honeywell Field Device Access Point - FDAP Gen3 Anchor

Honeywell Field Device Access Point
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OWDOC-X256-en-323A 77
FDAP Gen3 Anchor
Attribute Specification
Model Numbers FDAP32/3P (Class 1 Div 2 / Zone 2)
Multiple
Standards/Field
Protocols
ISA100 Wireless (IEC 62734)
WirelessHART (IEC 62591)
BLE (v5.1)
Weight 2 kg (4.4 lbs.)
Dimensions 466 x 290 x 45 mm (18.34 x 11.41 x 1.77 in)
Power consumption 2.5 Watts@24VDC
PoE: 3W
External Ports and
Connections
2 X external antenna ports for 2.4 GHz ISA100 Wireless field
instruments, WirelessHART field instruments and RTLS
1 X grounding cable
Internal
Connections
1 X 10/100 Mbps auto-negotiation Ethernet port
1 X 3pin RS-485 port
Environmental
Ratings
IP66, IP67, G3 corrosion resistance per ANSI/ISA-S71.04-1985
Operating
Temperature
-40 to +70° C (IECEx, ATEX, CSA)
Operating Humidity 0~95% non-condensing
Transportation and
Storage Humidity
0~95% non-condensing
Mechanical Shock 5G Operational, 15 G Non-Operational
Data Rates and
Modulations
Radio (ISA100): 250 Kbps, DSSS/O-QPSK
Radio (RTLS): FHSS channel.
Radio (BLE): 1Mbps, FHSS/FSK
Wired: 10 / 100 Mbps Fast Ethernet
Frequency Band
and Operating
Channels
Unlicensed ISM Band (2.4 2.483 GHz)
13 DSSS channels for ISA100 Wireless and/or WirelessHART
40 FHSS Channels for RTLS
1 DSSS channel for RTLS

Table of Contents

Related product manuals