Honeywell FS20X Series - User-selectable Configuration Switches

Installation Guide and Operating Manual // Model FS20X™ Series
Honeywell 21
4.2 Product Variations
There are product variations above and beyond those that are field selectable by the end user(s). These
variations are provided for the customer that has specialized needs.Here is a list of current ordering options
for the Model FS20X™:
Model - # # # - # # - #
FS20X-211-22-2
MultiBand IR plus UV Detector, General Applications with Relays, 4-20mA Output, FireBus
II, 316
Stainless Steel Enclosure with M25 Conduit Entries, Class
I, Divisions 1 & 2, Groups B, C & D, Class
II, Groups E, F & G, Class III; Class I, Zone 1 AEx d/Ex d IIC: Ex db IIC, Ex tb IIIC; IR and UV Self-
Tests, Approvals: FM, cFM, ATEX, IECEx, LPCB EN 54-10:2002
Model Numbers
FS20X – IR2/UV, UV/IR Self-Test
Enclosure Types
0 = No Enclosure (Module Only)
1 = Aluminum, ¾” NPT Conduit Entries
2 = 316 Stainless Steel ¾” NPT Conduit Entries
3 = Aluminum, 25 mm Conduit Entries
4 = 316 Stainless Steel 25 mm Conduit Entries
Options
0 = Enclosure Assembly Only (Top & Base)
1 = Detector Module Only
2 = Detector with Enclosure
Outputs
1 = Fire, Auxiliary & Fault Relays / 4-20mA / FireBus II / ModBus
Application
1 = General Applications
Manufacturer’s Code
2 = Standard Honeywell Analytics Detector – Full Window
Approvals
1 = not available,
2 = FM, cFM (Class I, Divisions 1 & 2),
3 = FM, cFM, ATEX, IECEx (Class I, Zone 1),
4 = INMETRO,
5 = not available,
6 = BRE (EN54-10),
7 = CCCF,
8 = GOST (CUTR)