Honeywell Granit 1980i - Page 304

284 Xenon/Granit User Guide
Straight 2 of 5 IATA Message
Length
Minimum (1 - 48) *4 A25MIN## 190
Maximum (1 - 48) *48 A25MAX## 190
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 191
*Off X25ENA0 191
On X25ENA1 191
Matrix 2 of 5 Message Length Minimum (1 - 80) *4 X25MIN## 191
Maximum (1 - 80) *80 X25MAX## 191
Code 11 Default All Code 11
Settings
C11DFT 192
*Off C11ENA0 192
On C11ENA1 192
Code 11 Check Digits Required 1 Check Digit C11CK20 192
*2 Check Digits C11CK21 192
Code 11 Message Length Minimum (1 - 80) *4 C11MIN## 192
Maximum (1 - 80) *80 C11MAX## 192
Code 128 Default All Code 128
Settings
128DFT 193
Off 128ENA0 193
*On 128ENA1 193
ISBT Concatenation *Off ISBENA0 193
On ISBENA1 193
Code 128 Redundancy Range (0 - 10) *0 128VOT## 193
Code 128 Message Length Minimum (0 - 80) *0 128MIN## 194
Maximum (0 - 80) *80 128MAX## 194
Code 128 Append *On 128APP1 194
Off 128APP0 194
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 194
GS1-128 Default All GS1-128 Settings GS1DFT 195
*On GS1ENA1 195
Off GS1ENA0 195
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 195
Maximum (0 - 80) *80 GS1MAX## 195
Telepen Default All Telepen
Settings
TELDFT 196
*Off TELENA0 196
On TELENA1 196
Telepen Output *AIM Telepen Output TELOLD0 196
Original Telepen Output TELOLD1 196
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page