Honeywell Granit 1980i - Page 303

Xenon/Granit User Guide 283
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings
I25DFT 185
Off I25ENA0 185
*On I25ENA1 185
Interleaved 2 of 5 Check Digit *No Check Char. I25CK20 185
Validate, But Don’t
Transmit
I25CK21 185
Validate, and Transmit I25CK22 185
Interleaved 2 of 5 Message Length Minimum (2 - 80) *4 I25MIN## 186
Maximum (2 - 80) *80 I25MAX## 186
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 186
Off N25ENA0 186
*On N25ENA1 186
NEC 2 of 5 Check Digit *No Check Char. N25CK20 186
Validate, But Don’t
Transmit
N25CK21 186
Validate, and Transmit N25CK22 186
NEC 2 of 5 Message Length Minimum (2 - 80) *4 N25MIN## 187
Maximum (2 - 80) *80 N25MAX## 187
Code 93 Default All Code 93
Settings
C93DFT 187
Off C93ENA0 187
*On C93ENA1 187
Code 93 Message Length Minimum (0 - 80) *0 C93MIN## 188
Maximum (0 - 80) *80 C93MAX## 188
Code 93 Append On C93APP1 188
*Off C93APP0 188
Code 93 Code Page Code 93 Code Page C93DCP 188
Straight 2 of 5 Industrial Default All Straight 2 of 5
Industrial Settings
R25DFT 189
*Off R25ENA0 189
On R25ENA1 189
Straight 2 of 5 Industrial Message
Length
Minimum (1 - 48) *4 R25MIN## 189
Maximum (1 - 48) *48 R25MAX## 189
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
Settings
A25DFT 190
Straight 2 of 5 IATA *Off A25ENA0 190
On A25ENA1 190
Straight 2 of 5 IATA Redundancy Range (0 - 10) *0 A25VOT## 190
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page