Honeywell H4W4PER3 - Configuring System Settings; Configuring General System Settings

800-23288 - A - 07/2017
8
Configuring System Settings 8
This chapter contains the following sections:
• Configuring General System Settings, page 71
• Configuring Date and Time Settings, page 72
• Configuring Account Settings, page 73
• Resetting the Camera, page 78
• Backing Up/Restoring a Configuration, page 78
• Configuring Maintenance Settings, page 79
• Upgrading the Firmware, page 79
• Viewing Version Information, page 79
• Managing Logs, page 80
• Viewing Online Users, page 81
Configuring General System Settings
You can configure the device name, user interface language, video standard, and maximum
log quantity settings on the Setup > System > General > General page.
To change the device name, in the Device Name field, enter a new name, and then click Save .
To change the interface language, select a language from the
Language list, and then click Save .
To change the video standard, select
NTSC or PAL from the Video Standard list, and then click
Save .
To change the
Max Log Quantity , enter a value between 1 and 1024 , and then click Save .