EasyManuals Logo

Honeywell HC30WF5R1 Configuration Guide

Honeywell HC30WF5R1
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
ii
Cautions and Warnings
WARNING Installation and servicing should be performed only by qualified
and experienced technicians to conform to all local codes and to maintain your
warranty.
WARNING To ensure compliance with electrical safety standards this product
is intended for use with a Listed Power Adapter marked with “Limited Power
Source”, “LPS”, on the unit, output rated 12 V DC, minimum 0.7A, Tma=60°C or
from Power over Ethernet (PoE) provided by Listed Information Technology
Equipment meeting the IEEE 802.3af PoE standard.
The Ethernet connection is not intended to be connected to exposed (outside
plant) networks. Do not connect two power sources to the camera at the same time.
Regulatory Statements
Photobiological safety
This product fulfills the requirements for photobiological safety according to IEC/EN 62471
(risk group 1).
General Data Protection Regulation
Please be aware that this product can store personal data.
Personal data is protected by the General Data Protection Regulation (2016/679) in Europe
and therefore the owners of personal data have obtained certain rights thanks to this
regulation.
We strongly advise you to be fully aware of these owner (“data subjects”) rights as well as
which limitations you have to obey regarding the use and distribution of this data.
Further details can be found on the GDPR website of the EU:
https://ec.europa.eu/commission/priorities/justice-and-fundamental-rights/data-
protection/2018-reform-eu-data-protection-rules_en

Table of Contents

Other manuals for Honeywell HC30WF5R1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC30WF5R1 and is the answer not in the manual?

Honeywell HC30WF5R1 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
IK codeIK10
Form factorSpherical
Mounting typeCeiling
Product colorBlack, White
International Protection (IP) codeIP66
White balanceAuto, Manual
Camera shutter speed1/5 - 1/32000 s
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.7 \
Number of effective pixels (H x V)2560 x 1920 pixels
Number of lenses-
Night vision distance20 m
Total megapixels- MP
Maximum resolution1920 x 1920 pixels
Video formats supportedH.264, H.265, M-JPEG
Thermal frame rate (NTSC)30 Hz
Supported graphics resolutions1536 x 1536, 1920 x 1920
Ethernet interface typeFast Ethernet
Supported network protocolsIPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, DHCP, NTP, DNS, DDNS, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, TLS
Compatible memory cardsMicroSD (TransFlash), SDHC, SDXC
Maximum memory card size256 GB
Ethernet LAN (RJ-45) ports1
DC output voltage12
Power source typeDC, PoE
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Height59.7 mm
Weight820 g
Diameter159.95 mm
Package weight1500 g

Related product manuals