Configuring Storage Settings
79
Figure 7-10 Recording 1
• Click Recording 1 (Name): Opens the Recording Settings page to modify.
• Click ON (Status): The Status will become OFF and stop recording.
• Click SD (Destination): Opens the file list of recordings.
Adding NAS Server
Figure 7-11 Add NAS Server
Click Add NAS server to open the server setting window and follow the steps below to set up:
1. Enter the information for your server.
Server Name: Enter a name for your server.
Network Storage Location: Enter the network storage path: \\server
name or IP
address\folder name
Workgroup: Enter the workgroup for your server.
User Name: Enter the user name for your server.
Password: Enter the password for your server.
2. Click Test to check the setting. The result will be shown in the pop-up window. If it is
successful, you will receive a test.txt file on the network storage server.
3. Click Save to complete the settings and click Close to exit the page.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
