Performance Series IP Camera Software Configuration Guide
76
• Lock/Unlock: Select the checkbox in front of a desired search result, then click this
button. The selected items will become Locked, which will not be deleted during cyclic
recording. You can click again to unlock the selections.
• Remove: Select the desired search results, then click this button to delete the files.
Recording Settings
Go to Setup Storage Setup Recording Settings.
This section describes how to configure the recording settings for the camera.
Figure 7-8 Recording Settings
SD Test: Insert the SD card and click here to test.
Note
Format your SD card via the camera’s web console when using it
for the first time. For more information, see SD Card Status on page
73.
Adding a Recording Setting
Click Add to open the recording setting window. On this page, you can define the adaptive
recording, recording source, recording schedule, and recording capacity. A total of 2 recording
settings can be configured.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
