Honeywell HPF24S8 - Installation Precautions; System Re-acceptance Test After Software Changes; Environmental and Temperature Considerations; Static-Sensitive Component Handling

HPTV2416(CB) and HPTV2416-1(CB) Installation Instructions P/N 52406:B 08/17/2005 3
!
WARNING:
• To reduce risk of electric shock, do not expose unit to rain or excessive moisture, and disconnect
power before servicing unit.
• For continuous protection against hazard, replace fuses only with exact type and rating.
• A readily accessible switched circuit breaker must be available to disconnect mains power as required.
• All 120 V wiring should be routed so that it cannot touch 24 V wiring; minimum spacing 3/8" (0.953 cm).
• Installation & servicing should only be made by qualified personnel; contains no user-serviceable parts.
• Install in accordance with all local regulations and the National Electrical Code.
NOTE: For additional information
• Visit our website: http://www.honeywellpower.com
• Contact Technical Support: (877) HPP-POWR (477-7690)
• Email us: hpp_techserv@honeywell.com
WiringHPTV2416.wmf
WiringHPTV2416-1.wmf