Need help?Do you have a question about the Honeywell NOTIFIER APS2-6R/E and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | NOTIFIER APS2-6R/E |
| Category | Power Supply |
| Language | English |
Covers NFPA standards, NEC, local codes, and Canadian electrical code compliance.
Details product compliance with UL 864 9th Edition and mentions retrofit applications.
Lists compatible devices and refers to the Device Compatibility Document.
Lists part numbers for supplemental manuals and documents.
Explains the meaning of CAUTION, WARNING, and NOTE symbols used in the manual.
Describes the APS2-6R as a 150W cabinet-mounted power supply with three 24 VDC output circuits.
Lists key features like AC/DC operation, output circuits, brownout detection, and battery supervision.
Details electrical specifications, input/output power, supervision, fuses, and loss of AC indication.
Identifies components and LEDs on the APS2-6R board layout.
Describes how to mount the APS2-6R in a CAB-3/4 Series backbox or an AFP-200 cabinet.
Outlines requirements for separating power-limited and non-power-limited wiring during installation.
Details field wiring for the APS2-6R, including connections and requirements.
Explains how to configure delay settings for AC power loss reporting using jumpers.
Covers servicing the APS2-6R, specifically replacing the F2 fuse.
Describes mounting and wiring the APS2-6R with the NFS2-3030 system.
Describes mounting and wiring the APS2-6R with NFS2-640 and NFS-320 systems.
Describes mounting and wiring the APS2-6R with the AFP-200 system.
Describes mounting and wiring the APS2-6R with AFP-300/AFP-400 systems.
Details mounting and wiring the APS2-6R with AM2020/AFP-1010 and System 5000.
Describes mounting and wiring the APS2-6R with the NFS-640 system.
Describes mounting and wiring the APS2-6R with the NFS-3030 system.
Details mounting and wiring the APS2-6R with the XPIQ Transponder.
Discusses powering NACs on ICM and ICE modules from the APS2-6R.
To Next Page