Honeywell L5200 Series User Manual

– 19 –
SECURING THE PREMISES
Arming the System
Ready To Arm
Arm the system in Stay mode
Enter Code:
Cancel Quick Arm
2 31
564
0
8 97
Clear
5200-100-082-V0
Arm Night
2. Select the ”Arm Night”, then enter a valid User Code.
OR
If Quick Arm has been enabled, select the “Quick Arm” icon.
Note: If a valid user code is not entered or the Confirm icon has
not been selected within 10 seconds, the system returns to
the “home” screen and it will not be armed.
Armed Stay - Exit Now
Exit now
28 seconds
5200-100-016-V0
Phone
More
Message
Zones
Disarm Restart
10:18 AM June 8, 2010
System
3. The system beeps three times and announces “Armed Stay
Exit Now”. The exit delay screen is displayed. If programmed
the display counts down the time remaining in the exit delay.
Armed Stay
5200-100-017-V0
Phone
More
Message
Zones
Disarm
10:18 AM June 8, 2010
System
4. At the end of the exit delay the system announces “Armed
Stay” and displays the “Armed Stay” screen.
If an invalid User Code is entered or if a valid user code has not been entered within 10 seconds, the system
will return to the “home” screen and it will not be armed.

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English