Honeywell L5200 Series User Manual

– 54 –
USER FUNCTIONS
WiFi Configuration
View/Join Available WiFi Networks
WiFi ConfigDate Time
Ready To Arm
Events
Back
Reminders
KeypadUsers
5200-100-036-V0
Slide Show
Test
1. At the Master User screen select the WiFi Config icon. The
system displays the WiFi options screen.
5200-100-073-V1
Scan Access Points
Manual Configure AP
Automatic Video Recovery
WPS
Press the WPS button on the access point, then press this WPS button.
Ready To Arm
2. Select the “Scan Access Points” button to view the available
networks. The available networks are displayed. Use the
down  arrow to scroll to the next page of options. Use the
 arrow to return to the previous page.
Ready To Arm
5200-100-074-V0
Edit
Scan
SSID = Vtek, RSSI = -62dbm
SSID = JimC, RSSI = -66dbm
SSID = Toms_net, RSSI = -86dbm
3. Select the desired Network and then select the “Edit” button.
The network information is displayed. If a password is
required, select the “Key” button and enter the password.
5200-100-075-V0
Ready To Arm
Network Type
Infrastructure
Security
WPA1
Key
* * * *
Join
Name SSID
Toms_net
4. Select the “Join” button. A confirmation screen will be
displayed.
5. Select the “Save button, then select the “” button as
required to return to the Master User screen.

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English