Honeywell L5200 Series User Manual

– 60 –
USER FUNCTIONS
Speaker Phone Feature
If this feature has been programmed the LYNX Touch is capable of operating as a speaker phone. During
speaker phone operation the system will provide the following functions:
• All function/event processing will continue to operate, but there will be no announcements.
NOTE: The system will enter the Speaker Phone mode even if an alarm or trouble is stored in the system memory.

Do not use the speaker phone as the only telephone in your home since in some special cases the speaker
phone is not functional.
The system will not enter speaker phone mode and LYNX Touch will not ring if:
• The feature has not been programmed.
• A report is being sent.
• An audible alarm is present.
• An announcement is being made or a recorded message is being played back.
• A message is being recorded.
• If the system is in test mode.
• AC power is not present
The speaker phone will be aborted if:
• A report must be sent.
• An audible alarm or trouble has ocurred.
Using the Speaker Phone Feature
When the LYNX Touch is operating in the Speaker Phone mode, if a zone is violated and has triggered an
entry/exit delay, the system will automatically change the touch screen from telephone to security mode. This
allows the user to disarm the system or take other appropriate actions in the security mode without
interrupting the telephone session. To regain telephone keypad control you will need to reactivate the telephone
keypad.
Placing a Call
Armed Stay
5200-100-021-V0
Phone
More
Message
Zones
Quick ExitDisarm
10:18 AM June 8, 2010
System
1. With the system in the disarmed or armed state, select the
“Phone” icon from the Security Screen. The system displays
the Keypad screen.
Ready To Arm
Talk
2 31
5
64
0
8
97
Flash
Redial
Volume
5200-100-085-V0
2. Select the “Talk” icon and then enter the number you wish to
dial. The “End” icon replaces the “Talk” icon. Selecting the
“Redial” icon will allow you to redial the last number that was
dialed.
3. Select the “Flash” icon to switch between two calls.
4. Select the “End” icon to hang up and end the call.

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English