– 32 –
SECURING THE PREMISES
Voice Mode
Voice Mode
Your system can be set to provide you with a voice alert of system functions by activating the Voice mode. When
activated, the system will announce the system status when armed/disarmed.
Turning Voice Mode On or Off
Arm Away
Ready To Arm
Arm Stay
BackDelay
Settings
10:18 AM June 8, 2010
5200-100-033-V0
Tools
1. With the system in the disarmed or armed state, select the
“Settings” icon from the second page of the Security Screen.
The system displays the Keypad screen.
Note: The Settings Screen display is variable dependent upon
the features that have been programmed in your system.
Ready To Arm
ChimeRingerVoice
Brightness
Contrast
Volume
5200-100-034-V0
Save
Clean
2. Select the “Voice” icon. The system will toggle between “Off”
and “On”, and when selected the button turns green. When
“On” is selected, the Voice mode will be active.
3. Select the “Save” button to save your new settings and return
to the Security screen.
To Next Page
Loading...
Need help?
General
