Honeywell L5200 Series User Manual

– 52 –
USER FUNCTIONS
Reminders
Ready To Arm
Save
5200-100-068-V0
Name
Frequency
None
Voice
No
Acknowledge
No
Ready To Arm
5200-100-069-V0
A
Q
Z
S
W
L
OP
M
K
I
N
J
U
V
G
T
B
H
Y
C
F
R
X
D
E
Clear
Done
123!@#
abc...
5. Select “Name”. Enter a name for the scheduled function on
the displayed keypad then select “Done”.
6. Select “Frequency” then select one of the following displayed
options:
None Once
Daily Weekday
Weekly Monthly
7. Program the following options based upon the Frequency
selected in step 6:
Once Date/Start Time
Daily Start Time
Weekday Start Time
Weekly Day of the Week/Start Time
Monthly Day of the Month/Start Time
Sunrise Day of the Week/Start Time
Sunset Day of the Week/Start Time
Ready To Arm
5200-100-070-V0
Reminders 1 Stopped
Record DeletePlay
8. If a voice reminder is desired, select “Voice”. The system
toggles between “No” and “Yes”. If yes is selected, the record
reminders screen appears.
9. Select the “Record” button and record your reminder. When
you are finished select the “Stop” button followed by the “”
button. The system returns to the Reminder programming
screen.
Ready To Arm
Save
5200-100-071-V0
Start Time
3:00 PM
Date
January 1, 2011
Frequency
Once
Name
Walk Dog
Voice
No
Follow Me
Disabled
Acknowledge
No
10. If a “Follow Me” phone number(s) was programmed by your
installer you can send a reminder to the phone number(s).
Select “Follow Me” option. The system toggles between
“Disabled”, “To Ph. 1”, “To Ph. 2” and “To Ph. 1 & 2”, as
applicable.
Note: For important reminders you should program the
“Acknowledge” option. When this option is selected, the
reminder will continue to play until it is acknowledged.
11. Select the “Acknowledge” option. The system toggles
between “No and “Yes”.
12. Select “Save” when all applicable options have been
programmed.

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English