Honeywell Lynx Plus Programming Guide

- 5 -
Data Field Display Function& Programming Options [ ] = Programmed Table 1 Default Values
41
4141
41
PRIMARY
PRIMARY PRIMARY
PRIMARY TEL
TEL TEL
TEL NUM
NUMNUM
NUM
Primary Phone Number
Enter up to 20 digits; Do not fill unused spaces. If fewer than 20 digits entered, pressing
✻advances to the next field. To clear entries from field, press ✻41✻.
42
4242
42
SECOND
SECOND SECOND
SECOND TEL
TELTEL
TEL NUM
NUM NUM
NUM
Secondary Phone Number
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24 digits entered, pressing
✻advances to the next field. To clear entries from field, press ✻42✻.
!
All four digits of the subscriber account number must be entered in Fields ✻
✻✻
✻43 and ✻
✻✻
✻44. If ten digit format is selected
in
✻
✻✻
✻48 (option 5), all ten digits of the Subscriber Account number must be entered.
In fields ✻43, ✻44, enter 4 to 10 digits. Enter 0–9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; [#+15 for F].
Enter ✻ as 4th digit, if 3+1 dialer reporting is to be used. If only 3 digits used, pressing ✻ advances to the next
field. Enter [✻] as the fifth digit if a 4-digit account number (for 4+1, 4+2, CID®) is used. To clear entries from
field, press ✻43✻ or ✻44✻.
Examples:
For Acct. 1234, enter: 1 | 2 | 3 | 4 ; For Acct. B234, enter: #+11| 2 | 3 | 4
For Acct. 1234567890, enter: 1| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 ; For Acct. 123, enter: 1 | 2 | 3 | ✻
43
4343
43
PRIMARY
PRIMARY PRIMARY
PRIMARY ACCOUNT
ACCOUNTACCOUNT
ACCOUNT#
Primary Subscriber Account Number
See note above.
44
4444
44
SECNDRY
SECNDRYSECNDRY
SECNDRY ACCOU
ACCOUACCOU
ACCOUNT
NTNT
NT#
Secondary Subscriber Account Number
See note above.
46
4646
46
FOLLOW
FOLLOW FOLLOW
FOLLOW ME
ME ME
ME PHONE
PHONEPHONE
PHONE#
“Follow Me” Reminder Phone Number
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24 digits entered, pressing ✻
advances to the next field. To clear entries from field, press ✻46✻.
Enter 0-9, #+11 for ‘✻’; #+12 for ‘#’; #+13 for a pause (two seconds).
47
4747
47
PHONE
PHONE PHONE
PHONE SYS
SYS SYS
SYS SELECT
SELECTSELECT
SELECT
Phone System Select
† [5]
Central Dialing Mode
Station Pulse Tone Pulse Tone
No WATS 0 = No Speaker
Phone
1 = No
Speaker Phone
4 = With
Speaker
Phone
5 = With
Speaker Phone
WATS 2 = No Speaker
Phone
3 = No
Speaker Phone
6 = With
Speaker Phone
7 = With
Speaker Phone
48
4848
48
REP
REP REP
REP FRMT
FRMT FRMT
FRMT PRI/SEC
PRI/SECPRI/SEC
PRI/SEC
Report Format for Primary/Secondary
[7, 7]
Primary Secondary
0 = 3+1, 4+1 ADEMCO L/S STANDARD
1 = 3+1, 4+1 RADIONICS STANDARD
2 = 4+2 ADEMCO L/S STANDARD
3 = 4+2 RADIONICS STANDARD
5 = ADEMCO CONTACT ID® REPORTING
WITH 10-DIGIT SUBS ACCT NO.
6 or undefined = 4+2 ADEMCO EXPRESS
7 = ADEMCO CONTACT ID® REPORTING
WITH 4-DIGIT SUBS ACCT NO.
8 = 3+1, 4+1 ADEMCO L/S EXPANDED
9 = 3+1, 4+1 RADIONICS EXPANDED
† Entering a number other than the one specified may give unpredictable results.
Note: If you are using Pulse (rotary) Dialing, you must enter the
numbers slowly to allow the pulse dialer time to operate.
Note: Option 5 or 7 (ADEMCO Contact ID®)
must be selected for AAV.

Honeywell Lynx Plus Specifications

General

Model	Lynx Plus
Battery Backup	Yes
Voice Prompts	Yes
Installation	DIY or professional
User Codes	8
Display	LCD
Keypad	Built-in
Siren	Built-in
Compatibility	Honeywell 5800 series wireless devices
Panel Type	Self-Contained Wireless Security System
Warranty	2 years