■
Press until you reach the exact time, within 10
minutes. (Hold the key to advance the time in 10-
“o
w
minute increments, tap the key to back up. )
Tap to store the time and date in the thermostat’s
Mode memory. The normal room temperature display
will
return.
11
c1
60 70 80 90
1111111111111111111
n
8:20
SET CLOCK
PM
SMT;
TFS
H
60 70 80 90
1111111111111111111
●
.mmmm
70
SMTWTFS
ROOM TEMPERATURE
DISPLAYED
69-8026—2
STEP 3
CHECK YOUR
SETIINGS
Press until PROGRAM shows in the display.
Mode
60 70 80 90
1111111
lllllllillll
n
■
6:00
PROQRAM
AM
■ nmnmmm
SMTWTFS
Press to review each program you have set.
Fast
12
.- —
Press until normal temperature display returns.
Mode
D
60 70 80 90
1111111111111111111
■
mmmmm
70
SMTWTFS
ROOM TEMPERATURE
DISPLAYED
STEP 4
OPTION-ADDING AN EXTRA NIGHITIME SET POINT
If you have not used all 6 set points in any given day, consider programming a second
nighttime set point.
For example, if your regular bedtime is 10:30 p.m., put in a 1:00 a.m. set point that is the
same temperature as the 10:30 p.m. set point. The entry of the second set point ensures that
even if
you stay up past
your bedtime and override your program, you won’t have to remember
to set the thermostat back when you go to bed.
13
69-8026—2
To Next Page
Loading...
Need help?
General
