Honeywell MM14CCS - User Manual

Other manuals for Honeywell MM14CCS

Service Manual13 pages

User Manual16 pages

Specifications3 pages

Questions and Answers

M
Mark MooreAug 21, 2025
Why is my Honeywell Air Conditioner running but not cooling?
- H
  Henry KnightAug 21, 2025
  If your Honeywell Air Conditioner isn't cooling, several factors could be at play. Start by ensuring all doors and windows are closed. A dirty air filter can also reduce cooling efficiency, so clean it. Check that the exhaust hose is correctly installed and not detached. The temperature setting might be too high, so try reducing it. Also, make sure neither the air outlet nor the intake is blocked. If the room is larger than recommended for the unit, move it to a smaller space. Finally, consider covering windows with curtains or blinds if their size or number is impacting cooling effectiveness.
G
Gabriela BarnettSep 3, 2025
What to do if Honeywell Air Conditioner will not run and Power button is blinking (water full indicator)?
- K
  Kelsey Rodriguez MDSep 3, 2025
  If your Honeywell Air Conditioner won't run and the power button is blinking (water full indicator), it means there's excess water condensation inside the tank. You'll need to drain the water.
J
jfrederickSep 1, 2025
What to do if my Honeywell MM14CCS Air Conditioner runs only a short while?
- T
  Teresa PattersonSep 1, 2025
  If your Honeywell Air Conditioner runs only briefly, the thermostat temperature setting may be too close to the room temperature; try lowering the set temperature. Ensure the air outlet isn't blocked and the exhaust hose is properly connected. Check for tight bends in the air exhaust hose and connect it as per instructions.
R
Ruben Alvarado MDAug 31, 2025
How to troubleshoot Honeywell MM14CCS that does not start?
- R
  Roy RobertsAug 31, 2025
  If your Honeywell Air Conditioner unit doesn't start, begin by checking for power. Ensure the power cord is properly plugged in; try removing and reconnecting it. Also, the batteries in the remote control might need replacing, so change them.
K
katie29Aug 29, 2025
What to do if Honeywell MM14CCS Air Conditioner runs but is not cooling?
- M
  Marissa WestAug 29, 2025
  If your Honeywell Air Conditioner runs but isn't cooling, check these potential causes: Ensure all doors and windows are closed. A dirty air filter can also cause this problem, so clean it. Also, make sure the exhaust hose is properly reinstalled. Check that your temperature setting isn't too high, and clear any blockages from the air outlet or intake.
R
Robert RobbinsAug 27, 2025
Why Honeywell MM14CCS runs but no cooling?
- F
  freemanloriAug 27, 2025
  If your Honeywell Air Conditioner runs but doesn't cool, several factors could be at play. First, ensure all doors and windows are closed. A dirty air filter can also hinder cooling, so clean it. Check that the exhaust hose is properly attached. The temperature setting might be too high, so try reducing it on the control panel. Finally, make sure neither the air outlet nor the intake is blocked by any obstructions.
J
Jacqueline MaciasAug 26, 2025
How to fix a Honeywell MM14CCS Air Conditioner that does not start?
- A
  Andre BrownAug 27, 2025
  If your Honeywell air conditioning unit doesn't start, check for power, change the remote control batteries, remove and reconnect the power cord, and reset the safety GFI plug. If the problem persists, contact customer support.
B
Brett HunterAug 25, 2025
What to do if my Honeywell Air Conditioner runs but there is no cooling?
- L
  leestevenAug 25, 2025
  If your Honeywell Air Conditioner is running but not cooling, ensure the window or door is closed, clean the air filter, reinstall the exhaust hose properly, reduce the temperature setting on the control panel, and remove any blockage.
J
jamie15Aug 23, 2025
What to do if my Honeywell MM14CCS does not run?
- J
  Jennifer CarterAug 23, 2025
  If your Honeywell Air Conditioner isn't running, start by checking if the plug is properly inserted. Also, check the protector trip or fuse. If tripped, wait 3 minutes and restart the unit; the protector device might be preventing it from working. If you are using a remote controller, make sure the batteries are not exhausted.

Honeywell MM14CCS Specifications

General

Type	Monobloc mobile air conditioner
Timer	Yes
Timer type	Digital
Hose length	1.2 m
Noise level	53 dB
Hose diameter	127 mm
Refrigerating medium	R410A
Cooling capacity (max)	14000 BTU/h
Dehumidifying capacity	1.875 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying, Fan
Suitable for room area up to	46.5 m²
Cooling capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	-
Display type	LCD
Product color	Black, Silver
Connected load	1500 W
Hourly energy consumption (heating)	- kWh