Barcode Tab
Start > Settings > Control Panel > Scanner > Barcode tab
The Barcode tab contains several options to control bar code processing. Options include:
l Defining custom Code IDs
l Disable processing of specified bar code symbologies
l Rejecting bar code data that is too short or too long
l Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l Replacing control characters
l Adding a prefix and a suffix.
Notes:
l The Scanner application (Wedge) can only enable or disable bar code processing inside the Wedge software.
l The Scanner application enables or disables the Code ID that may be scanned.
l Enabling or disabling a specific bar code symbology is done manually using the configuration bar code in the Integrated
Scanner Programming Guide.
Choose an option in the Enable Code ID drop-down box: None, AIM ID, Symbol ID, or Custom ID.
4-129
To Next Page
Loading...
