Discover
Tap the Discover button to locate all discoverable Bluetooth devices in the vicinity. The Discovery process also queries for the
unique identifier of each device discovered.
Stop Button
Tap Stop at any time to end the Discover and Query for Unique Identifier functions. Devices not paired are not shown after any
reboot sequence.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX7 Bluetooth
scanning range, the Bluetooth connection between the paired device and the MX7 is lost. There may
be audible or visual signals as paired devices disconnect from the MX7.
4-60
To Next Page
Loading...
