Volume and Sounds
Start > Settings > Control Panel > Volume & Sounds
Note: An application may override the control of the speaker volume. Turning off sounds saves power and
prolongs battery life.
Set volume parameters and assign sound WAV files to CE events using these options.
You can also select / deselect sounds for key clicks and screen taps and whether each is loud or soft.
As the volume scrollbar is moved between Loud and Soft, the MX7 emits a tone each time the volume increases or decreases.
Volume must be enabled when you want to adjust volume settings using keypad keys.
Factory Default Settings
Volume
Events Enabled
Application Enabled
Notifications Disabled
Volume Middle of Bar
Key click Disabled
Screen tap Disabled
Sounds
Scheme LOUD!
Good Scan and Bad Scan Sounds
4-156
To Next Page
Loading...
