EasyManuals Logo

Honeywell Notifier AFP-3030 User Manual

Honeywell Notifier AFP-3030
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Page 2 of 2 DOC-02-133
© 2009 by Honeywell International Inc. All rights reserved.
Unauthorised use of this document is strictly prohibited.
This document is not intended for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specic applications or anticipate all requirements.
All specications are subject to change without notice.
For more information contact your nearest Notier Sales Oce or Distributor
www.notier.com.au
Specifications:
Sensitivity Fixed: 63°C.
Sensitivity Rate-of-Rise: 63°C or an increase of greater
than 8.3°C/min.
Operating Voltage Range: 15 VDC to 32 VDC
Standby Current: 300 μA @ 24 VDC (one communication
every 5 seconds with LED blink
enabled).
Maximum Alarm Current (LED On): 6.5 mA @ 24 VDC.
Operating Humidity Range: 10% to 93% Relative humidity (Non-
condensing).
Installation Temperature Range: -10° C to 50° C.
Height: 51 mm.
Diameter: 104 mm installed in B501 base.
Ordering Information
FG-03-006 FDX851AUS CLIP xed thermal detector
FG-03-007 FDX851RAUS CLIP rate-of-rise thermal detector

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Notifier AFP-3030 and is the answer not in the manual?

Honeywell Notifier AFP-3030 Specifications

General IconGeneral
BrandHoneywell
ModelNotifier AFP-3030
CategoryControl Panel
LanguageEnglish

Related product manuals