NCA-2 Manual — P/N 52482:M5 03/20/2019 87
Delete Programming Programming
5.7 Delete Programming
The following menu allows complete or partial clearing of programming.
Figure 5.50 Delete Programming
CLEAR ALL PROGRAMMING - Press to remove all panel and ACS programming information. Pressing this key removes everything
except passwords. A confirmation screen will display asking the user to confirm the deletion command. Pressing this key causes a
reboot.
CLEAR: PANEL - Press to remove all programmed panel setting information from control panel memory. This does not remove ACS
programming. A confirmation screen will display asking the user to confirm the deletion command. Pressing this key causes a reboot.
CLEAR ACS - Press to remove all ACS programming from panel memory. A confirmation screen will display asking the user to con-
firm the deletion command. Pressing this key causes a reboot.
Main menu
Program/alter status menu
Delete Programming
DELETE PROGRAMMING
CLEAR: PANEL CLEAR ALL PROGRAMMING
CLEAR ACS
ACCEPT
BACK
To Next Page
Loading...
