Need help?Do you have a question about the Honeywell OELD and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | OELD |
| Category | Transmitter |
| Language | English |
Provides essential safety warnings and precautions for operating the OELD unit.
Step-by-step instructions for performing the electrical installation of the OELD.
Provides a wiring diagram for connecting the OELD to the Searchpoint Optima Plus.
Wiring diagram for connecting the OELD to the Searchline Excel.
Wiring diagram for connecting the OELD to the Searchline Excel Cross-Duct.
Instructions for connecting the SHC-1 Handheld Interrogator via the SHC Protection Device.
Specifies the required voltage and power consumption for the OELD unit.
Overview of configurable parameters for the OELD using the mobile app.
Sets the gas reading level for local alarm indication on the OELD backlight.
Configures mA output levels to match sensor status for OELD display.
Step-by-step guide to configuring the OELD using a mobile device via Bluetooth.
Explains how the OELD LCD backlight indicates sensor status during normal operation.
Details the OELD's Bluetooth Low Energy interface for configuration and maintenance.
Step-by-step instructions for downloading and installing the OELD mobile application.
Guide on how to launch, log in, and register for the OELD mobile application.
Instructions on how to connect the OELD mobile app to OELD units via Bluetooth.
Lists configurable parameters for the OELD device via the mobile app.
Details configurable parameters for the Searchpoint Optima Plus via the OELD mobile app.
Guide on how to perform zero and span calibration using the OELD mobile app.
To Next Page
