www.honeywell.com/security
20 | Performance Series IP Camera Software Configuration Guide
Key Features
Key features of the Performance Series IP cameras include the following:
Camera • Day/Night mode auto-switch
• Picture parameter setup, such as electronic shutter
and gain
• Motion detection
• Backlight compensation
• Video watermark function to prevent modification
• IR night vision
Storage • Central server backup (configure in Alarm or
Schedule settings)
• Recording over Internet, files stored on client PC
• Network storage (FTP)
Network Monitoring • One-channel video data transmission to a network
terminal and decoding
• Delay time less than 270 ms (network bandwidth
support required)
• Up to 20 connections
• Compatible with the following network protocols:
IPv4/IPv6, HTTP, HTTPS, TCP/IP, UDP, UPnP, ICMP,
IGMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE,
DDNS, FTP, IP Filter, QoS
Network Management • Camera configuration and management via Ethernet
• Device management via Internet or client PC
User Management • Each user belongs to specific group
• Different user rights for each group
• User rights cannot exceed group rights
System Management • Log function
• System resource information and running real-time
status display
To Next Page
Loading...
