Honeywell Performance HBD3PR2 - Figure 5-33 Group Configuration Interface; Figure 5-34 Add Group Interface; Group

Configuring Camera Settings | 79
800-21358 - A - 10/2015
Modifying a Password: Enter the old password once, and then enter the new password twice
to confirm the new password. Click Save to save the new settings.
Note Passwords can contain up to 32 characters, using numbers and letters only.
Only users with account rights can modify other users’ passwords.
Group
In the Group configuration interface, you can add/remove groups and modify group passwords.
Figure 5-33 Group Configuration Interface
Adding a Group: Add a group and configure that group’s rights. Enter the group name, and
then check the box to select the corresponding rights (Live, Record Control, Account).
Figure 5-34 Add Group Interface
Modifying a Group: Click Modify Group to open the Modify Group interface.