Configuring Camera Settings | 49
800-21358 - A - 10/2015
Anti-flicker Outdoor: In Outdoor mode, you can select any exposure mode to avoid
flicker.
50Hz: When the current is 50Hz, the system can automatically adjust the
exposure according to the environment’s brightness to prevent stripes in
the video.
60Hz: When the current is 60Hz, the system can automatically adjust the
exposure according to the environment’s brightness to prevent stripes in
the video.
Exposure
Auto The video brightness can automatically change
according to the changes in the scene’s lighting. If
you set a higher gain max value, then you will get
less noise.
Low Noise The video whole brightness can automatically
change within the proper exposure range according
to the different environments. The higher the gain
max value is, the lower the noise.
For the same environments, the noise of the low
noise mode shall be smaller than the noise of the
auto mode.
Low Motion Blur The video whole brightness can automatically
change within the proper exposure range according
to the different environments. The lower the gain max
value is, the weaker the tail.
For the same environments, the noise of the Low
Motion Blur mode will be smaller than that of the
Auto mode.
Manual Displays manual exposure values.
White Balance Sets the White Balance mode, which affects the general hue of the video.
This function is on by default.
You can select different scene modes such as Auto, Sunny, Outdoor,
Night, or Customized, to achieve the best quality video.
Auto: Auto white balance is on. The system automatically adjusts the color
temperature to ensure that the video color is correct.
Sunny: The white balance threshold is set to sunny mode.
Night: The white balance threshold is set to night mode.
Customized: You can manually set the gain for the red/blue channel. The
value ranges from 0 to 100.
Outdoor: The white balance threshold is set to outdoor mode.
Table 5-1 Camera Configurations (cont’d)
Parameter Function
To Next Page
Loading...
Need help?
General
