2 PW-7000 Output Module (PW7K1OUT) Installation Guide, Document 800-25675V1
Specification
The Output Board is for use in low voltage, class 2 circuits only.
Primary power:
12VDC + 10%, 385mA maximum
Relay contacts:
Relays 0 through 15 outputs, Form-C, 2A @ 30VDC, resistive
Inputs:
Two unsupervised dedicated inputs
Communication:
Wire requirements:
Mechanical:
Environment:
RS-485
Range 9,600 to 38,400 bps
Power
1 twisted pair, 18AWG
RS-485
24AWG, 4,000 feet (1,200 m) max., 2 twisted pair with shield
(120?, 23pF) (Belden 9842 or equiv.)
Inputs
1 twisted pair per input, 30 ohms max.
Outputs
As required for the load
Dimension
5.5" (140 mm) W x 9" (229 mm) L x 1" (25 mm) H
Weight
12 oz. (340 g) nominal
Temperature
0°C to +49°C, operating, -55°C to +85°C, storage
Humidity
0% to 85% RHNC
To Next Page
Loading...
