Honeywell PW7K1OUT User Manual

8 PW-7000 Output Module (PW7K1OUT) Installation Guide, Document 800-25675V1
Step 5. Connect relay output wiring as appropriate.
Step 6. Connect communications wiring to the Intelligent Controller.
Step 7. Recheck wiring for correct connections and continuity.
Step 8. When all boards have been installed, connect the power supply cord for
proper connections and power.
Step 9. Set up the panel controls using the host software.

Honeywell PW7K1OUT Specifications

General

Brand	Honeywell
Model	PW7K1OUT
Category	I/O Systems
Language	English