12 RP2/RP4 User Guide
5. Press the media button 2 or 3 times to normalize tracking. Each button
press advances the paper to the start of the next label.
Configure the Media
Note: If you haven’t downloaded the drivers and software, you must do so now. See
Download Required Software.
Most applications use the printer’s default media setting of Gap, for gap labels.
However, if reflective (black mark), or continuous media is used, you must change
the printer’s settings.
1. Turn the printer on. If you are using a USB interface, connect the USB cable to
the computer.
2. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
Query Printer Configuration (or press CTRL-q) to query the printer.
3. Under Printer Information, select Media Label.
4. Click in the entries under the New Value column to update the settings for your
media type. Each setting will have a dropdown list from which you can choose a
new value.
To Next Page
Loading...
Need help?
General
