Honeywell RP4D-I - InfrastructureAd-Hoc; Wireless LAN Security; WEP 64 and 128 Bit; WPA2-PSK with CCMP

22 RP2/RP4 User Guide
3. Click on WPA/WPA2.
4. Change (or confirm) the following parameter settings:
• Group Cipher: TKIP
• Network Authentication Type: WPA-PSK_TKIP
5. Type the pass phrase under WPA_PSK_TKIP/WPA2_PSK settings.
6. After updating the New Value column, click the Send button to send this
change to the printer.
7. Allow 30 seconds for the printer to reset.