Honeywell RTH7600 Series Installation Instructions

Advanced Installation Guide
69-2206ES—05 20
About your new thermostat
SETUPWIRINGASSISTANCETROUBLESHOOTING
See page 14 to navigate between functions.
Function Settings & Options
0500 Furnace Filter
Change
Reminder
Press s/t to set the desired
reminder interval:
0 Off (no reminder)
1 Reminder after 10-day run time
(about 1 month)
2 Reminder after 30-day run time
(about 3 months)
3 Reminder after 60-day run time
(about 6 months)
4 Reminder after 90-day run time
(about 9 months)
5 Reminder after 120-day run
time (about 1 year)
6 Reminder after 365-day run
time (about 3 years)
0530 Smart
Response
®
Technology
Press s/t to turn this feature on or
off (see Operating Manual for more
information about this feature):
1 On
0 Off
0640 Clock Format
Press s/t to set the clock display
format:
12 12-hour clock (i.e., “3:30 pm”)
24 24-hour clock (i.e., “15:30”)
Press DONE to save and exit setup.
System setup

Honeywell RTH7600 Series Specifications

General

Programmability	7-day programmable
Temperature Range	40°F to 90°F (4°C to 32°C)
Accuracy	+/- 1°F
Hold Function	Yes
Filter Change Alert	Yes
Power Source	Battery and/or Hardwired
Compatibility	Gas, oil, electric, heat pump systems
Temperature Control	Precise temperature control of +/-1°F
Stages	2 Heat/2 Cool
Display Type	Touchscreen
Weight	6.4 oz (181 g)